Rukh Gen-2 (Hybrid)

Introducing the little brother of our full-titanium Rukh!!  For users who does not require the battery-access port unique to the RMR, our award-wining Rukh is now available with lighter weight, aluminum optic plates.  Unlike the RMR version which the very thin frame around the battery access requires the strength of Titanium, these optic plates made from aerospace grade aluminum are plenty strong for the hardest and roughest missions you can throw at it.  While still featuring all of the advantages that sets the Rukh apart from all our competitions!!

• "Quite possibly the coolest single accessory of SHOT Show 2020" - Recoil
• All CNC'ed in-house and proudly Made in USA
• Pivot body allows the backup optic to rest as close to, or as far from, the primary optic.
  • NEW - Gen.2 Positive Locking feature provides 10 adjustable angle
• 1.93 height improves shooting comfort (TFB review HERE).
• NEW - 2.26 height is NVG passive-aiming compatible
• Grade 5 Titanium provides maximum strength.
• Interchangeable base plates for use with multiple brands of optics.
• Also available for co-witness height.
  • User-replaceable towers can convert mount to different optic heights in the future.
• Completely reversible for right or left-handed shooters.
• Selecting "None" on Optic-Plate option will get you JUST the base clamp and tower; useful if you are changing system height, or already have one of our optic plates (e.g. from the Hanger) which you will be moving over to this.

Optic Plate Compatibilities
RMR: also fits Holosun 407C/507C/508T or other RDS with Trijicon compatible footprints.
DeltaPoint Pro: also fits Holosun 407K/507K or other RDS with DeltaPoint compatible footprints.
Aimpoint Micro: T-1/H-1/T-2/H-2 plus other RDS with Aimpoint Micro footprints.
RTS2: also fits Vortex Razor Red Dot or other RDS with CMore RTS2 compatible footprints.

Installation Instructions:

• Optic-plate to Tower screws (4x):  Medium thread locker @ 12 inch-lb
• RDS to base-plate screws (2x): Medium thread locker @ 12 inch-lb
• Tower to clamp screws (2x): Medium thread locker @ 45 inch-lb
• Use T15 Torx driver for the 4x optic-plate screws; 9/64 hex driver for the 2x clamp screws (hex drivers NOT included)

Optional Stainless Steel clamp-screws can be found here, or bundled via the option before the "Add-to-Cart" button.

Screws to install your optic to the Rukh are NOT included - they will typically come with your optic.  For RMR, use 6-32 x 1/2".  Holosun uses 6-32 x 3/8".  DPP uses a custom M4 screw only available from Leupold.

System Weights

• Tower + Clamps + all screws:  39g (1.93) / 34g (co-witness)
• RMR Optic Plate:  21g
• RTS2 Optic Plate:  19g
• T1 Optic Plate:  14g
• DeltaPoint Pro Optic Plate:  19g

For example, total system weight for the heaviest setup (RMR + 1.93) would be 39g+21g = 60g (or, only 2.1 oz)

Co-Witness or 1.93?

• If your 12 o'clock optic (magnified or otherwise) is 1.93 height, go with 1.93 Rukh for sure.
• If your 12 o'clock optic is lower 1/3 co-witness, go with 1.93 Rukh.  It typically aligns better.
• If your 12 o'clock optic is absolute co-witness, go with co-witness Rukh.  UNLESS:
  • You want a more up-right head position for CQB.  1.93 offset could speed up dot acquisition.
  • You want improved situational awareness when switched to red dot.  A taller offset keeps your eyes higher above bore, which means you can see past the 12 o'clock optic better.
  • You have a large offset light or laser (e.g.MAWL) in front that could be blocking the view.